حامد ادیبی - دانشگاه صنعتی امیرکبیر

M. Tanoorsaz, M. Alinaghipour, H. Adibi, S. Rezaei, "Additive manufacturing approaches to abrasive machining challenges: a comprehensive review", Progress In Additive Manufacturing, vol. 1, no. 1, pp.1-19, 2026.

H. Safikhanlu, M. Ahmadi Najafabadi, H. Adibi, "Mechanical and acoustic emission assessment of drilled GFRP composites under combined static loading", Engineering Failure Analysis, vol. 195, no. 110995, pp.1-27, 2026.

M. Alinaghipour, H. Adibi, S. Rezaei, "Advancements in five-axis 3D printing for process and surface enhancement: optimizing cartesian FDM through DOE", Progress In Additive Manufacturing, vol. , no. 1, pp.1-15, 2026.

M. Alinaghipour, H. Adibi, "Surface integrity enhancement of additively manufactured parts using various chemical post-processing techniques and treatment durations", Progress In Additive Manufacturing, vol. 11, no. , pp.181-203, 2026.

A. Kiadarbandsari, Mohammad Vahid Ehteshamfar, H. Adibi, "Ensemble machine learning for predicting surface roughness improvement in chemo-mechanical post-processing of additive manufacturing dental parts", Progress In Additive Manufacturing, vol. 0, no. , pp.1-15, 2025.

B. Taghizadeh, M.V. Ehteshamfar, H. Adibi, "Lapping optimization of additively manufactured ABS-carbon fiber composite parts using the soft computing technique", Polymer Testing, vol. 128, no. 0, pp.1-14, 2023.

M. Bayat, H. Adibi, M. Najafimehr, A. Barzegar, "Investigation of sustainability and performance of Ag?coated CuO cutting fluid in grinding of Inconel 738", International Journal of Advanced Manufacturing Technology, vol. 128, no. 0, pp.3057-3075, 2023.

M. Bahrami, M.V. Ehteshamfar, H. Adibi, "The Effect, Prediction, and Optimization of Fe Particles on Wear Behavior of Fe-ABS Composites Fabricated by Fused Deposition Modeling", Arabian Journal For Science and Engineering, vol. 0, no. 1, pp.1-16, 2023.

H. Adibi, O. Hatami Farzaneh, S. Rezaei, "Effects of minimum quantity lubrication (MQL) on grinding processes using eco-friendly nanofluids: a review", Advances In Materials and Processing Technologies, vol. 0, no. 0, pp.1-43, 2023.

O. Hatami Farzaneh, D. Sayadi, M. Razbin, H. Adibi, "Optimization of Grinding Parameters of Tool Steel by the Soft Computing Technique", Computational Intelligence and Neuroscience, vol. 2022, no. 304213, pp.1-17, 2022.

H. Adibi, A. Moghaddam, O. Hatami Farzaneh, "Application of a Cryogenic Cooling System on the Grinding Operation of Polyether Ether Ketone Biomaterial (PEEK)", Arabian Journal For Science and Engineering, vol. 0, no. 0, pp.1-15, 2022.

M. Javadi, M.V. Ehteshamfar, H. Adibi, "A comprehensive analysis and prediction of the effect of groove shape and volume fraction of multi-walled carbon nanotubes on the polymer 3D-printed parts in the friction stir welding process", Polymer Testing, vol. 117, no. 0, pp.1-17, 2022.

S.H. Musavi, H. Adibi, S. Rezaei, "Manufacturing of durable tribological surface by grinding process", International Journal of Advanced Manufacturing Technology, vol. 122, no. 7, pp.3393-3410, 2022.

S.H. Musavi, H. Adibi, S. Rezaei, "An experimental study on bubble dynamics and pool boiling heat transfer of grinding/laser-structured surface", Heat and Mass Transfer, vol. 0, no. 0, pp.1-18, 2022.

R. Nourizadeh Nesheli, M. Zareinejad, S. Rezaei, H. Adibi, "Modeling of Sound Generation Mechanism During the Turning Process", Modares Mechanical Engineering, vol. 22, no. 8, pp.529-539, 2022.

O. Hatami Farzaneh, H. Adibi, S. Rezaei, "Evaluation of the grinding process utilizing an auxiliary compressed air jet on cleaning the grinding wheel surface", Proceedings of The Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, vol. 0, no. 0, pp.1-13, 2022.

S.H. Musavi, H. Adibi, S. Rezaei, "Development of an innovative grinding process for producing functional surfaces", Tribology International, vol. 173, no. 0, pp.1-20, 2022.

O. Hatami Farzaneh, H. Adibi, S. Rezaei, "Application of a compressed air jet for cleaning of wheel surface in grinding nickel-based super alloy Inconel 718", Cirp Journal of Manufacturing Science and Technology, vol. 37, no. 0, pp.233-244, 2022.

M. Bayat, H. Adibi, A. Barzegar, S. Rezaei, "Experimental and numerical investigation of heat generation and surface integrity of ZrO2 bioceramics in grinding process under MQL condition", Journal of The Mechanical Behavior of Biomedical Materials, vol. 131, no. 0, pp.1-16, 2022.

A. Barzegar, H. Adibi, Mohammad Javad Pakravan, "The surface and subsurface integrity in coupled operation of fused deposited modeling and centrifugal disk finishing", Rapid Prototyping Journal, vol. 29, no. 9, pp.1731-1749, 2022.

M.V. Ehteshamfar, M. Javadi, H. Adibi, "Surface modification of prototypes in fused deposition modelling using lapping process", Rapid Prototyping Journal, vol. 0, no. 0, pp.1-12, 2022.

R. Nourizadeh Nesheli, S. Rezaei, M. Zareinejad, H. Adibi, "Comprehensive investigation on sound generation mechanisms during machining for monitoring purpose", International Journal of Advanced Manufacturing Technology, vol. 121, no. 0, pp.1589-1610, 2022.

H. Esmaeili, H. Adibi, Reza Rizvi, S. Rezaei, "Coupled thermo-mechanical analysis and optimization of the grinding process for Inconel 718 superalloy using single grit approach", Tribology International, vol. 171, no. 0, pp.1-20, 2022.

H. Adibi, F. Jamaatisomarin, A. Rahimi, "Analytical simulation of grinding forces based on the micro-mechanisms of cutting between grain-workpiece", International Journal of Advanced Manufacturing Technology, vol. 119, no. 0, pp.4781-4801, 2022.

F. Jamaatisomarin, H. Adibi, A. Rahimi, "Analytical Modeling of Cutting Forces in Grinding of AISI 1060 Heat Treated Steel Considering Undeformed Chip Thickness Distribution", Modares Mechanical Engineering, vol. 21, no. 10, pp.685-692, 2021.

S. Hashemi, H. Adibi, "Experimental and Numerical Investigation of Fatigue Behavior of Polylactic acid Components Made by Additive Manufacturing Method", Amirkabir Journal of Mechanical Engineering, vol. 53, no. 6, pp.3703-3716, 2021.

H. Adibi, S. Hashemi, "Experimental study on tensile strength of copper microparticles filled polymer composites printed by fused deposition modelling process", Rapid Prototyping Journal, vol. 0, no. 0, pp.1-11, 2021.

H. Adibi, M. Khani, H. Esmaeili, "Experimental evaluation of electrophoretic deposition-assisted polishing", Proceedings of The Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, vol. 0, no. 0, pp.1-9, 2021.

S. Hashemi, H. Adibi, A. Nazeri Astanjin, "Experimental Analysis of Abrasion Resistance of Acrylonitrile Butadiene Styrene Components Made by Fused Deposition Modelling Using Response Surface Method", Modares Mechanical Engineering, vol. 21, no. 4, pp.235-245, 2021.

H. Esmaeili, H. Adibi, S. Rezaei, "Study on surface integrity and material removal mechanism in eco-friendly grinding of Inconel 718 using numerical and experimental investigations", International Journal of Advanced Manufacturing Technology, vol. 112, no. 0, pp.1797-1818, 2021.

S.J. Aaraj Khodaii, H. Adibi, F. Barazandeh, S. Rezaei, Ahmed A.d. Sarhan, "Investigation of the surface integrity, flexural strength on the grinding of alumina for biomedical applications", Precision Engineering-Journal of The International Societies For Precision Engineering and Nanotechnology, vol. 67, no. 0, pp.110-122, 2020.

H. Esmaeili, H. Adibi, S. Rezaei, "Surface Quality, Efficiency and Process Optimization of Grinding Carbon Fiber?Reinforced Silicon Carbide Composite", Modares Mechanical Engineering, vol. 20, no. 6, pp.1409-1421, 2020.

S.J. Aaraj Khodaii, H. Adibi, F. Barazandeh, A. Solhtalab, S. Rezaei, Ahmed A.d. Sarhan, "Improvement of surface integrity in the grinding of bioceramic partially stabilized zirconia using analytical, numerical, and experimental methods", Ceramics International, vol. 46, no. 9, pp.13784-13797, 2020.

H. Adibi, A. Sorati Ashtiani, A. Rahimi, "In-Process Monitoring of Nickel-Based Super Alloy Grinding Using the Acoustic Emission Method", Russian Journal of Nondestructive Testing, vol. 55, no. 12, pp.909-917, 2020.

S.J. Aaraj Khodaii, F. Barazandeh, S. Rezaei, H. Adibi, Ahmed Sarhan, "Surface integrity and flexural strength improvement in grinding partially stabilized zirconia", Journal of Central South University, vol. 26, no. 12, pp.3261-3278, 2020.

S.J. Aaraj Khodaii, F. Barazandeh, S. Rezaei, H. Adibi, Ahmed Sarhan, "Influence of grinding parameters on phase transformation, surface roughness, and grinding cost of bioceramic partially stabilized zirconia (PSZ) using diamond grinding wheel", International Journal of Advanced Manufacturing Technology, vol. 105, no. 11, pp.4715-4729, 2019.

Ebrahim Yarali, Arman Mohammadi, Sheyda Mafakheri, Mostafa Baghani, H. Adibi, "Mathematical modeling and experimental evaluation of a prototype double?tube Magnetorheological damper", Sn Applied Sciences, vol. 2019, no. 1, pp.13-41, 2019.

A. Solhtalab, H. Adibi, A. Esmaeilzare, S. Rezaei, "Cup wheel grinding-induced subsurface damage in optical glass BK7: An experimental, theoretical and numerical investigation", Precision Engineering-Journal of The International Societies For Precision Engineering and Nanotechnology, vol. 57, no. 0, pp.162-175, 2019.

H. Esmaeili, H. Adibi, S. Rezaei, "An efficient strategy for grinding carbon fiber-reinforced silicon carbide composite using minimum quantity lubricant", Ceramics International, vol. 45, no. 0, pp.10852-10864, 2019.

F. Barazandeh, S.J. Aaraj Khodaii, S. Rezaei, H. Adibi, Ahmed Sarhan, "Investigation of grinding partially stabilized zirconia (PSZ) for dental Implant application", , vol. 18, no. 4, pp.951-958, 2018.

H. Esmaeili, H. Adibi, S. Rezaei, "Experimental study on grinding forces and specific energy in three different environments of grinding carbon fiber reinforced silicon carbide composite", , vol. 18, no. 1, pp.379-387, 2018.

H. Adibi, H. Esmaeili, S. Rezaei, "Study on minimum quantity lubrication (MQL) in grinding of carbon fiber-reinforced SiC matrix composites (CMCs)", International Journal of Advanced Manufacturing Technology, vol. 0, no. 0, pp.1-15, 2017.

H. Adibi, E. Yarali، رمضان شمس, "Design, fabricate and testing the novel Magnetorheological damper involving stabilizer nanoparticles of silicone", , vol. 17, no. 8, pp.252-258, 2017.

H. Esmaeili, H. Adibi, S. Rezaei, "Modelling and optimization of creep feed grinding parameters for gas turbine blades", , vol. 15, no. 13, pp.318-322, 2015.

A. Esmaeilzare, H. Gholipour, H. Adibi, S. Rezaei, "Surface and Subsurface Damage Measurements in Zerodur Glass-Ceramic Grinding Process and their Correlation with Surface Roughness", , vol. 15, no. 13, pp.332-337, 2015.

H. Adibi, A. Akbari, A. Nakhaei, "Unified experimental and finite element analysis of the mechanical performance of 3D-printed honeycomb and auxetic sandwich cores", Composites Part C: Open Access, vol. 18, no. 1, pp.1-20, 2025.

مقالات همایش‌ها

A.H. Zarghami, H. Adibi, "A review of parameters affecting the dimensional accuracy of parts produced by FDM.,", The 33rd Annual International Conference on Mechanical Engineering of Iran (ISME2025), May 2025.

S. Shaker, H. Adibi, "Realistic finite element simulation of components made with fused deposition modeling Process,", The 18th National Conference and 7th International Conference on Manufacturing Engineering, Mar 2022.

M. Khani, H. Adibi, Mohadeseh Goldoust, "experimental investigation of Electrophoretic Deposition Assisted Polishing,", The 28th Annual International Conference of Iranian Society of Mechanical Engineers-ISME2020, May 2020.

S. Hashemi, H. Adibi, "Experimental investigation on the FDM process parameters effect on the mechanical properties of polymer-metal composite,", 28th annual international conference of Iranian society of mechanical engineering, May 2020.

S. Hashemi, H. Adibi, "experimental analysis and finite element modeling of mechanical properties of additive manufactured parts,", 28th annual international conference of Iranian society of mechanical engineering, May 2020.

S. Hashemi, H. Adibi, A. Salimi Beni, "Optimization of process parameters on the mechanical properties of additive manufactured parts,", ICME 2019, Dec 2019.

دروس ارائه شده

عنوان درس

توصیف درس

سرفصل ها

دوره درسی

Physics of Metrology Lab.(Manufacturing Engineering)

4051

Physics of Metrology Lab.(Manufacturing Engineering)

4051

Physics of Metrology Lab.(Manufacturing Engineering)

4051

Physics of Metrology Lab.(Mechanical Engineering)

4051

Physics of Metrology Lab.(Mechanical Engineering)

4051

Physics of Metrology Lab.(Mechanical Engineering)

4051

SURFACE FINISHING TECHNIQUES

4051

Fundamentals of Additive Manufacturing technologies

4051

Additive Manufacturing

4051

Physics of Metrology Lab.(Mechanical Engineering)

آشنایی با سیستم های اندازه گیری و تجهیزات مربوطه

4042

Grinding Technology

4042

Physics of Metrology Lab.(Manufacturing Engineering)

4042

Physics of Metrology Lab.(Manufacturing Engineering)

4042

Physics of Metrology Lab.(Manufacturing Engineering)

آشنایی با سیستم های اندازه گیری و تجهیزات مربوطه

4042

Physics of Metrology

اموزش روشهای اندازه گیری در مهندسی به دانشجو

4042

Physics of Metrology Lab.(Mechanical Engineering)

آشنایی با سیستم های اندازه گیری و تجهیزات مربوطه

4042

Quality Control

4042

Physics of Metrology Lab.(Mechanical Engineering)

آشنایی با سیستم های اندازه گیری و تجهیزات مربوطه

4042

Fundamentals of Additive Manufacturing technologies

4041

Additive Manufacturing

4041

Physics of Metrology Lab.(Manufacturing Engineering)

4041

Physics of Metrology Lab.(Manufacturing Engineering)

4041

Physics of Metrology Lab.(Manufacturing Engineering)

4041

Physics of Metrology Lab.(Manufacturing Engineering)

4041

Physics of Metrology Lab.(Mechanical Engineering)

4041

Physics of Metrology Lab.(Mechanical Engineering)

4041

SURFACE FINISHING TECHNIQUES

4041

Grinding Technology

4032

Physics of Metrology Lab.(Mechanical Engineering)

4032

Physics of Metrology Lab.(Mechanical Engineering)

4032

Physics of Metrology Lab.(Manufacturing Engineering)

4032

Physics of Metrology Lab.(Manufacturing Engineering)

4032

Physics of Metrology

4032

Physics of Metrology Lab.(Manufacturing Engineering)

4032

Physics of Metrology Lab.(Manufacturing Engineering)

4032